Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In 7 Year Warranty
No reviews
Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In 7 Year WarrantyThe -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are des...
Special Offer
- In Stock
- Free Delivery Available*
- Get 5% off on your first order. Use code WELCOME5
HURRY UP! ONLY 0 LEFT IN STOCK
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 45 days of purchase. Duties & taxes are non-refundable.
Pairs well with
Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In 7 Year Warranty
The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes cabinets or other enclosures that allow users to connect audio sources.
The -TPSL2A modules feature an XLR microphone input and two RCA phono jack inputs summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The summed left and right line-level inputs are routed to output cable pair B.
These modules drive only two cable pairs therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPSL2A. A single-pair sender must be set to feed pair C if it is connected together with the -TPSL2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The -TPSL2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL2A may be remotely powered through the twisted pair cable from any other module signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity ease of installation unsurpassed flexibility automatic fused power exceptional hum rejection low noise and low distortion provide designers and installers the optimum choice in economical twisted pair products.
• Balanced Microphone XLR Input with Phantom
• Switch-Selectable Mic Gain on Rear Panel
• Two Unbalanced -10 dBV Phono Jack Line Inputs
• MIC Feeds Pair A; L and R Summed to Mono Feed Pair B
• Remote Powering through Twisted Pair Cable
• Fused Local Power Feeds all Connected Modules
• Local Power Input on Terminal Block
• Blue LED Indicates Module is Powered
• Utilizes Two Format-A Pairs
• Studio-Quality Precision Active Balanced Circuitry
7 Year Warranty
| Features | |
|---|---|
| Warranty | 7 Years |
Shipping Policy
1. Shipping Rates and Delivery Times
We offer a variety of shipping options to meet your needs. Standard shipping typically takes 5-7 business days, while expedited shipping options are available for faster delivery. Please note that delivery times may vary based on your location and the shipping method selected.
2. Processing Time
All orders are processed within 1-2 business days. Orders placed on weekends or holidays will be processed the following business day.
3. Shipping Carriers
We partner with reputable carriers such as [Carrier Names] to ensure reliable delivery.
4. Tracking Your Order
Once your order has shipped, you will receive a tracking number via email so you can monitor its progress.
5. International Shipping
We offer international shipping to select countries. Please be aware that customs fees and import duties may apply, and these charges are the responsibility of the customer.
6. Lost or Damaged Items
If your order is lost or arrives damaged, please contact us within 7 days of receiving your order. We’ll be happy to assist you with a replacement or a refund.
7. Shipping Restrictions
We do not ship to P.O. Boxes or certain restricted countries. Please check our list of excluded locations at checkout.
8. Shipping Costs
Shipping costs are calculated at checkout based on your location and the shipping method chosen.
9. Free Shipping
Enjoy free standard shipping on orders over $1000.
10. Customs and Import Duties
For international orders, customs duties and taxes may apply. These charges are the responsibility of the customer.
11. Contact Us
If you have any questions or need assistance with your order, please contact our customer service team at Hello@CrystalTech.Group or 03335678444.
Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In 7 Year Warranty
The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes cabinets or other enclosures that allow users to connect audio sources.
The -TPSL2A modules feature an XLR microphone input and two RCA phono jack inputs summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The summed left and right line-level inputs are routed to output cable pair B.
These modules drive only two cable pairs therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. One single-pair sender may be chained with the -TPSL2A. A single-pair sender must be set to feed pair C if it is connected together with the -TPSL2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The -TPSL2A may be powered directly from a 24 Vdc power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL2A may be remotely powered through the twisted pair cable from any other module signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity ease of installation unsurpassed flexibility automatic fused power exceptional hum rejection low noise and low distortion provide designers and installers the optimum choice in economical twisted pair products.
• Balanced Microphone XLR Input with Phantom
• Switch-Selectable Mic Gain on Rear Panel
• Two Unbalanced -10 dBV Phono Jack Line Inputs
• MIC Feeds Pair A; L and R Summed to Mono Feed Pair B
• Remote Powering through Twisted Pair Cable
• Fused Local Power Feeds all Connected Modules
• Local Power Input on Terminal Block
• Blue LED Indicates Module is Powered
• Utilizes Two Format-A Pairs
• Studio-Quality Precision Active Balanced Circuitry
7 Year Warranty
| Features | |
|---|---|
| Warranty | 7 Years |
Shipping Policy
1. Shipping Rates and Delivery Times
We offer a variety of shipping options to meet your needs. Standard shipping typically takes 5-7 business days, while expedited shipping options are available for faster delivery. Please note that delivery times may vary based on your location and the shipping method selected.
2. Processing Time
All orders are processed within 1-2 business days. Orders placed on weekends or holidays will be processed the following business day.
3. Shipping Carriers
We partner with reputable carriers such as [Carrier Names] to ensure reliable delivery.
4. Tracking Your Order
Once your order has shipped, you will receive a tracking number via email so you can monitor its progress.
5. International Shipping
We offer international shipping to select countries. Please be aware that customs fees and import duties may apply, and these charges are the responsibility of the customer.
6. Lost or Damaged Items
If your order is lost or arrives damaged, please contact us within 7 days of receiving your order. We’ll be happy to assist you with a replacement or a refund.
7. Shipping Restrictions
We do not ship to P.O. Boxes or certain restricted countries. Please check our list of excluded locations at checkout.
8. Shipping Costs
Shipping costs are calculated at checkout based on your location and the shipping method chosen.
9. Free Shipping
Enjoy free standard shipping on orders over $1000.
10. Customs and Import Duties
For international orders, customs duties and taxes may apply. These charges are the responsibility of the customer.
11. Contact Us
If you have any questions or need assistance with your order, please contact our customer service team at Hello@CrystalTech.Group or 03335678444.